log in
menu
log in
Entries for Geothermal Manufacturing Prize
Geothermal 3-Axis Wideband Vibration/Accelometer
An additive manufactured geothermal 500°C rated 3-axis 20 kHz wideband piezoelectric vibration and accelerometer Sensor with voltage output
read more...
by
Harold Snyder
Device to Remove Scale in Geothermal Wells by A.M.
Using Additive Manufacturing to design, fabricate Pipe Interventions Gadget (P.I.G.) for Removal of Scale Deposition from Geothermal Wells
read more...
by
Dreamer Geothermophiles
Using AM to rapidly deploy new sensors into EGS
Ozark IC is bringing processing power to the edge in extreme environments such as EGS via additive manufacturing of HT electronics circuits.
read more...
by
Ozark Integrated Circuits
3D Printing of High-Temperature Elastomers for EGS
We plan to formulate fluoroelastomer compounds with suitable viscosity and mechanical properties and manufacture parts with 3D printing.
read more...
by
Huilin Tu's team
AMEC Downhole Tools
AMEC is used for large abrasive resistant downhole tools showing cost and time savings compared to traditional manufacturing or other AM.
read more...
by
Buckeye Metallurgists
Ultra-High Temperature Logging Tool Set Submission
Prototype Tool taking advantage of AM to reduce thermal conductivity between geothermal reservoir and sensitive electronics module.
read more...
by
Ultra-High Temperature Logging Tool
Pump geothermal and oil wells without electricity
GreenDrive substantially reduces the parasitic power loss that pumping wells imposes on the geothermal and oil industries; reduces GHGs too.
read more...
by
GreenFire Energy Inc.
Optimization of Gas Sparger Head for Airlift
The proposed technology is interested in optimizing, designing, and printing a sparger head for geothermal airlift system.
read more...
by
Team PLUGS
A new Isolation Packer System for Geothermal Wells
Additive manufacturing will significantly reduce the manufacturing cost of a new innovative all-metal isolation packer for geothermal wells.
read more...
by
Ken Havlinek
Additively Manufactured Mechanical Metamaterials
Additively manufactured mechanical metamaterials are a technology for improving EGS equipment survivability in the downhole environment
read more...
by
Multiscale Systems
Novel Metal Annular Barrier for Geothermal Systems
Additive manufacturing will enable the enhancement of the metal annular barrier for effective zonal isolation in geothermal wells.
read more...
by
Team Welltec
Helical Downhole Heat Exchanger for C/L Geothermal
Design/manufacture a helical downhole heat exchanger using 3D printing to deliver an efficient globally-scalable C/L geothermal system.
read more...
by
Sage Geosystems Team
3D Printed Frac plug for Geothermal Applications
We propose to develop a 3D-printed, high strength fiber reinforced composite frac plug for high temperature geothermal zonal isolation
read more...
by
Bhushan Pendse's team
Additive Manufactured Backup-Rings for Packers
High-temperature packer that's only possible using additive manufactured parts enabling production tubing isolation in wells up to 450F.
read more...
by
Team Baker Hughes
Project Hot Hammer
We have designed a revolutionary air hammer bit that will stay intact up to 600°C drastically speeding up the drilling process.
read more...
by
The Bit Guys
HyperDrill 3D™ for Geothermal Exploration and CDW
Slimline geothermal exploration hyper-impact drill, AM printed high temp Bottom Hole Assy, guaranteed ROP & AM for future low cost CWD wells
read more...
by
HyperSciences' Team
Page 1 of 2